5 Dos & Don'ts On Using Olympus OM-D Cameras

Here is a quick video I have made recently to summarize some common mistakes I have observed some photographers do while using their OM-D cameras, some done unintentionally, and also adding some additional tips on optimizing the use of the camera. Some of the recommendations are subjective, you may choose to disagree with them, but I did find them working well for me.


Here is the list of what I have discussed in the video, if you prefer to read instead of watching a 10 minutes long video:

1) DISABLE INSTANT PLAYBACK
All cameras (not just Olympus OM-D) has instant playback enabled, allowing quick preview of the previously shot image. While a lot of people need the acknowledgement to confirm that the previous shot was successfully taken, the short display time is interrupting the shooting process, and it stops the camera for that very brief period of time. This is even more true for fully electronic devices, using EVF and LCD screen. The quick display can be timed so badly that I did miss some shots happening real life because I need to half-press the shutter button to get rid of the playback. I suggest fully disabling instant playback, and only review your shots as necessary, when nothing crucial is happening while shooting.

2) DISABLE FUNCTION LEVER
The 2x2 function lever was introduced in Olympus PEN E-P5, and has made it into almost all Olympus OM-D cameras ever since. There are two function positions, 1 and 2. When set at position 1, the camera's  command dials (front and back dials) behave normally, as the camera should, controlling the basic exposure settings such as shutter speed, aperture and exposure compensation (depending on P, A, S or M modes). When the function lever is switched to position 2, the command dials control different set of settings, by default these settings are white balance and ISO. The problem I had was the switched being changed involuntary, sometimes  happening while inside the camera bag. Imagine a situation I need to change my shutter speed, instead of quickly adjusting the shutter speed with one of the dials I may have accidentally adjusted the white balance. This is problematic because once I realize the mistake, I need to correct the mistake first, eg correcting the white balance to the original setting, then switch the lever to the correct position, before finally getting to adjust what I wanted to adjust in the first place - shutter speed. The additional 2-3 steps to get to what I wanted to do, just simple shutter speed change, simply because of the wrong position of function lever, has caused me to miss some critical shots. This was frustrating so I have since then permanently disabled the function lever.

I wonder if anyone wanted me to explore the M.Zuiko 12-200mm lens more?

3) EVF DRAINS BATTERY MORE THAN LCD SCREEN
While this is not a secret anymore, and should be a common knowledge, I find that still quite a number of people  believe that by using the EVF on the OM-D camera, they will save more battery than LCD Screen. This belief originated from DSLR, which was true because using optical viewfinder (with no electronic components) uses no power, hence not using the LCD screen on a DSLR, you save battery. This is no longer true for mirrorless cameras with EVF, especially Olympus OM-D. The EVF has twice as much resolution and refresh rate, that they will suck the battery dry much faster than LCD screen. I suggest getting more batteries as spare and use EVF or LCD screen as you feel comfortable for each situation, and should not worry about battery life. But in the case that you have one battery left for a long duration of shoot, and you are doing all you can to conserve battery life, using the EVF all the time is a bad, bad idea.

4) DO NOT USE DIGITAL TELECONVERTER
I originally did not see this as an issue, we all know digital zoom will not give you the best results. However, the reason I put this into the list, is because I have quite a large number of people complaining to me that the images from their OM-D cameras were terrible in quality, has poor resolution, were not as good as even their smartphone cameras! I thought, wow, how bad can it be, when I inspected their images, truly they did tell me correctly, the images were blur, not sharp and blotchy. When I checked their cameras, very often the main cause is the teleconverter being switched on. Half of them did not realize they have enabled this accidentally, the other half did not know that digital teleconverter will cause severe image degradation. Instead of getting, say 16MP full resolution, you get practically only equivalent of 4MP output. Please, do not use the teleconverter. Trust me on this.

 5) SET NOISE REDUCTION TO AUTO
Lastly, make sure you did not turn ON the noise reduction setting. The noise reduction in Olympus camera is not exactly noise reduction, it is actually Dark Frame Subtraction method, a two step image shooting process (actual image + dark frame) to effectively remove hot pixels (due to image sensor heating up) during long exposure shooting. For E-M1 Mark II, after about 4 seconds or longer shutter speed is engaged, if you set noise reduction to auto, the dark frame subtraction method kicks in, and it will double the time  you shoot an image as the camera also captures a dark frame with the same shutter speed you have specified. This helps in long exposure, and necessary to ensure images are clean and free of "hot pixels". However, in normal shooting circumstances, say you are dealing with normal shutter speeds (1/60th, for example) if you intentionally turned the noise reduction setting on, the camera will take two frames as well, resulting in double the time the camera needs to capture one photograph. This will significantly delay shot to shot performance, with noticeable longer "blackouts" between frames. I don't recommend turning the noise reduction OFF either, just set it to Auto, and the camera is smart enough to figure out when to enable it. Just don't turn it on. The OM-D blazing speed will be crippled if you do so.

I hope you have found these tips useful! If you have more tips, please do share with everyone in the comments!

Please follow me on my social media: Facebook PageInstagram and Youtube

Please support me and keep this site alive by purchasing from my affiliate link at B&H. 

10 comments:

  1. To see how different people are: I miss a lot the 2x2 lever that I had in my E-M5 MK II. Used it for a time to switch between focus modes, another period to switch between stills and movie modes.

    ReplyDelete
    Replies
    1. If you find it useful, then stay with the modes!

      Delete
  2. I've been using the E-M10 mark 3 since it came out and I had no idea about the evf and battery life. Now I've seen two articles this morning telling me about it!

    ReplyDelete
  3. I love the function lever. I even set up a button to do the same thing on the PEN-F.
    I also like having the preview, but I set it to the lowest possible time, so it just essentially flashes on the EVF for a fraction of a second. I don't do action shots so this is fine for me.

    ReplyDelete
  4. I do use the 2x digital teleconverter on my E-M10-ii once in a while, but I'm aware of its limitations. The resolution will be the same as when cropping afterwards, except that the focusing and exposure will perhaps be more accurate. So the feature can be useful when you happen to have left the longer lens at home.

    ReplyDelete
  5. I had no idea about the EVF vs LCD. I did assume LCD was worse. Thanks for the explanation about the auto noise reduction, I have it on auto but always question if I should... Now I know!

    ReplyDelete
  6. TADACT 20 MG the similar therapeutic behavior as that of Tadalafil-based Cialis on the penis which faces difficulty in erection during the sexual indulgence except it’s easily available over the counter. Check out Tadact 20 MG Side Reviews

    ReplyDelete
  7. "CAVERTA 100 MG helps the muscles that are found around your blood vessel’s walls to relax, thus increasing the blood flow to specific areas of your body. Check outCaverta 100 MG Tablet Side Effects
    "

    ReplyDelete
  8. The quality of our Best Essay Writing Service are always high as we work hard to ensure that we uphold our good reputations at all time. We make sure that Nursing Essay Writing Services ordered are delivered on time and our prices are affordable to every student.

    ReplyDelete